3 Series E93 325d (M57T2) CONVER
54 37 240
Removing and installing/replacing
microswitch for baseplate
Necessary preliminary tasks:
•
Remove cowl panel trim
Release screws (1).
Tightening torque: 54 37 26AZ
.
Remove microswitch (2).
Removing guide plate if necessary only on build date (version) up
to 07/2007:
Release screw (1).
Pull back microswitch lever (3).
Remove guide plate (2).
RA Removing and installing/replacing microswitch for baseplate
BMW AG - TIS
26.01.2013 10:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
