3 Series E93 325d (M57T2) CONVER
54 37 ...
Gauging coupling fastener (without removing
and installing roof module)
Special tools required:
•
00 9 251
•
00 9 450
•
54 0 130
•
54 0 131
•
54 0 132
•
54 0 180
•
54 0 190
Important!
To prevent damaging the coupling fastener gauge, set the
gauge down only in the transportation crate or on the cross
beam.
The coupling fastener gauge is a highly sensitive measuring
instrument which reacts even to light impacts with distortion.
The coupling fastener gauge must be checked for
dimensional accuracy on a master gauge after being
subjected to impact or dropped.
Note:
Gauging of coupling fastener must be checked.
Necessary preliminary tasks:
•
Roof module must be installed
•
Remove panel for luggage compartment partition
•
Remove air outlet grille trim
•
Remove window cavity cover strip
•
Remove side trim upper section
•
Align basic gauge
RA Gauging coupling fastener (without removing and installing roof module)
BMW AG - TIS
26.01.2013 10:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
