3 Series E93 325d (M57T2) CONVER
63 25 000
Removing and installing/replacing auxiliary
brake light
Necessary preliminary tasks:
•
Remove panel for rear lid
Disconnect plug connection (1).
Release nuts (3) and remove springs (2) underneath.
Press auxiliary brake light at threaded pins (4) outwards and
remove.
Installation:
Make sure auxiliary brake light seal is correctly seated.
Tighten nuts (2) from inside outwards.
Tightening torque 63 25 1AZ
.
RA Removing and installing/replacing auxiliary brake light
BMW AG - TIS
26.01.2013 12:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
