3 Series E93 325d (M57T2) CONVER
67 11 555
Removing and installing/replacing servodrive
for tank filler flap
Necessary preliminary tasks:
•
Remove right luggage compartment wheel arch trim
•
Lay sound insulation in working area to one side
Slacken screws (1)
Feed out servodrive (2) with emergency actuator pull strap (3).
Turn sleeve (1) with a suitable tool (e.g.: pointed pliers) approx.
45
°
in direction of arrow and pull out of cover housing (2).
Installation:
Slide sleeve (1) over locking pin (2).
Make sure sleeve (1) is correctly engaged in cover housing (3).
RA Removing and installing/replacing servodrive for tank filler flap
BMW AG - TIS
26.01.2013 14:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
