3 Series E93 325i (N52K) CONVER
11 13 000
Removing and installing, sealing or replacing
oil sump (N52K)
Important!
Aluminium-magnesium materials.
No steel screws/bolts may be used due to the threat of
electrochemical corrosion.
A magnesium crankcase requires aluminium screws/bolts
exclusively.
Aluminium screws/bolts must be replaced each time they are
released.
The end faces of aluminium screws/bolts are painted blue for
the purposes of reliable identification.
Jointing torque and angle of rotation must be observed
without fail.
Risk of damage!
Necessary preliminary tasks:
•
Lower front axle
Note:
The lines must be detached from the oil sump on vehicles with
optional extra SA205 (automatic transmission); if necessary,
detach oil pump and place to one side.
RA Removing and installing, sealing or replacing oil sump (N52K)
BMW AG - TIS
30.01.2013 02:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
