3 Series E93 325i (N52K) CONVER
11 25 530
Removing and installing/replacing all pistons
(N52K)
Special tools required:
•
00 9 120
•
11 4 491
•
11 4 492
•
11 4 493
•
11 4 494
•
11 6 241
•
11 6 261
•
11 8 330
Warning!
Danger of injury!
Carry out work on piston pin circlip wearing protective goggles
only.
Important!
If piston, connecting rod, big end bearing cap and connecting
rod bearing shell are to be reused, they must be installed in
the same position.
Individual replacement of a connecting rod is not permitted.
Connecting rods are classified by weight categories and are
only available as a set for all cylinders.
Connecting rod and big end bearing cap are marked with
identical pairing letters and must not be mixed up.
Danger of engine damage!
Piston and piston pins are paired and must not be fitted
individually.
RA Removing and installing/replacing all pistons (N52K)
BMW AG - TIS
30.01.2013 02:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -