3 Series E93 325i (N52K) CONVER
Disconnect plug connection on lambda monitor sensor (1).
Release lambda monitor sensor (1) on exhaust manifold of
cylinder nos. 1 to 3 with special tool 11 4 260 .
Tightening torque 11 78 1AZ
.
Installation:
Cable colour of lambda monitor sensor (1), cylinders nos. 1 to 3 =
black.
Note:
To remove the lambda monitor sensor (1) on the exhaust
manifold of cylinder nos. 4 to 6, it is necessary to remove the
exhaust system.
Disconnect plug connection on lambda monitor sensor (1).
Release lambda monitor sensor (1) on exhaust manifold of
cylinder nos. 4 to 6 with special tool 11 4 260 .
Tightening torque 11 78 1AZ
.
Installation:
Cable colour of lambda monitor sensor (1), cylinders nos. 4 to 6 =
grey.
Assemble engine.
Check function of DME.
RA Replacing both lambda oxygen monitor sensors (N52K)
BMW AG - TIS
30.01.2013 03:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -