3 Series E93 325i (N52K) CONVER
Release nut (1) and remove screw towards front.
Unclip line holder (3) for pulse generator or brake pad sensor on
control arm.
Remove control arm (2).
Installation:
Bolt head points in direction of travel.
Replace self-locking nut.
Tightening torque 33 32 5AZ
.
After installation:
•
Perform chassis alignment check
RA Replacing one upper control arm
BMW AG - TIS
30.01.2013 07:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -