3 Series E93 325i (N52K) CONVER
Release screw (1) and remove holder (2).
Installation:
Tightening torque 34 41 2AZ
.
Note:
To release the parking brake Bowden cable from the expander
lock, it is necessary to remove the brake disk on the following
vehicles:
-
E90 330i 330d
-
All E91
-
E92 M3
Release one wheel stud.
Bring wheel into position (tapped hole turned down approx. 20
°
from horizontal).
F = direction of travel
Installation:
Reinstall wheel stud only after handbrake has been adjusted.
Tightening torque 36 10 1AZ
.
Nipple (1) and expander lock (2) are visible through tapped
hole.
Push in core of handbrake cable in direction of expander lock as
far as it will go and grip firmly.
Press nipple (1) downwards through tapped hole with a
screwdriver.
Pull handbrake cables out of wheel carrier.
RA Removing and installing or replacing both handbrake Bowden cables
BMW AG - TIS
30.01.2013 07:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -