3 Series E93 325i (N52K) CONVER
41 35 101
Replacing rear left side panel
Read contents of Body, General.
Use only approved spot-welding apparatus for repairs.
Remove or cover those vehicle components in the repair area
which are susceptible to heat or dust.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 35 101).
Place vehicle on straightening bench.
Following new body parts are required (refer to Electronic Parts
Catalogue ETK):
-
(1) Side panel, rear
Open weld joints in area (1).
Open brazed joint in area (2).
Spot-weld bonding is used on this vehicle. Observe specific
procedure.
Open weld joints in areas (1).
Open brazed joints in areas (2).
RA Replacing rear left side panel
BMW AG - TIS
30.01.2013 08:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
