3 Series E93 325i (N52K) CONVER
Open weld joints in area (1).
Installation:
Weld new component in area (2) additionally.
Mark severance cut (1) centrally and cut.
Cut floor pan and cross-member underneath.
Open weld joints in area (2).
Preparation of new part:
Mark severance cuts (1) in accordance with measurement and
cut.
Important!
Cut outer metal sheet only.
Measurement a=170 mm
Measurement b = 110 mm
Installation:
The parts separated by cutting are still needed.
Weld in reinforcement plates at severance cuts.
Preparation of new part:
Open weld joints in areas (2).
Installation:
The parts separated by cutting are still needed.
RA Replacing luggage compartment floor (complete with left or right inner wheel arc
BMW AG - TIS
30.01.2013 08:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -