3 Series E93 325i (N52K) CONVER
Release screws (1).
Tightening torque 51 23 2AZ
.
Carefully pull bumper trim (2) forwards and feed out hood/bonnet
lock (3) with cable.
Disengage cable (1) from hood/bonnet lock (2).
When replacing cable for hood/bonnet locks:
Feed cable (1) out of front wall (3).
RA Removing and installing/replacing right engine hood/bonnet lock
BMW AG - TIS
30.01.2013 10:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -