3 Series E93 325i (N52K) CONVER
Unlock plug connections (1) and disconnect.
Installation:
Plug connections are coded against incorrect assembly.
Unlock plug connections (2) and disconnect.
Installation:
Order of plug connection specified by wiring harness.
Disconnecting hydraulic lines from hydraulic unit:
•
Release screws and push lockplates (1) in direction of
arrow.
•
Detach hydraulic lines.
•
Remove hydraulic unit (drive).
Installation:
Hydraulic lines and connections are marked with numbers to
prevent mix-ups.
Check fluid level or top up if necessary.
RA Removing and installing/replacing hydraulic unit (drive) for retractable hardtop
BMW AG - TIS
30.01.2013 11:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
