3 Series E93 325i (N52K) CONVER
Important!
Tape off corners of roof shell 1 and 3. Risk of damage when
positioning gauge for coupling fastener and assembly.
Gauge, coupling fastener:
Note:
Coupling fastener must not be screwed into place for adjustment work (barrel screws move freely).
Slacken screw for rubber stop (1) and pull back.
Insert special tool 54 0 130 in coupling fastener.
RA Gauging coupling fastener (after removing and installing roof module)
BMW AG - TIS
30.01.2013 12:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -