3 Series E93 325i (N52K) CONVER
Release screws (1).
Tightening torque: 54 62 03AZ
.
Lift out rollover protection system.
Installation:
Carry out function check.
Replacement only:
Release screws (1) on all holders for middle trim grille.
Tightening torque: 54 37 04AZ
.
Remove holders for trim grille.
Release screws (2) on holders for rear trim grille.
Tightening torque: 54 37 04AZ
.
Remove holders for trim grille.
Modify all holders for control units.
Release screws (1).
Tightening torque: 54 26 05AZ
.
Modify striker with holders.
RA Removing and installing/replacing rollover protection system
BMW AG - TIS
30.01.2013 12:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -