3 Series E93 328i (N51) CONVER
Release screws in area (1).
Installation:
Replace aluminium screws.
Tightening torque, 11 12 4AZ
.
Unfasten screws (2).
Tightening torque, 11 12 4AZ
.
Installation:
Replace aluminium screws.
Replace seal (1).
Replace seal (2).
Installation:
Clean all sealing surfaces.
Do not clean sealing faces (1 and 2) with a metal-cutting tool.
Assemble engine.
RA Removing and installing or sealing cylinder head cover (N51)
BMW AG - TIS
04.02.2013 19:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -