3 Series E93 328i (N51) CONVER
Check setting of oil spray nozzles, adjusting if necessary:
Attach special tool 11 4 251 to screw connection on main
bearing.
Special tool 11 4 252 must be pre-installed at the seventh main
bearing block.
Tightening torque: 11 11 5AZ
.
Note:
See illustration.
Remove crankshaft (1).
Note:
Pilot bearing shell (1) at the fourth bearing block is a thrust
bearing.
Remove bearing shells (1).
RA Replacing all crankshaft main bearings (N51)
BMW AG - TIS
04.02.2013 19:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
