3 Series E93 328i (N51) CONVER
Note:
In event of heavy oil carbon residue:
Carefully remove oil carbon residue from cylinder wall.
Note:
Illustrations show N46.
Do not release screw (1).
Oil spray nozzle (2) must not be maladjusted or bent (risk of
damage).
Readjust if necessary.
Release conrod bolts (1).
Tightening torque, 11 24 1AZ
.
Remove conrod bearing cap (2) in direction of arrow.
Important!
Conrods and conrod bearing caps are denoted with the same
pairing letters; mixing them up will result in engine damage.
Attach special tool 11 8 330 in conrod big end.
Press out conrod and piston to cylinder head side.
Important!
Risk of damage to oil spray nozzle.
RA Removing and installing/replacing all pistons (N51)
BMW AG - TIS
04.02.2013 19:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
