3 Series E93 328i (N51) CONVER
Press retainer (1) in balance arm (2) forward in direction of
arrow.
Detach handbrake Bowden cables (3) from balance arm (2).
Pull handbrake cables out of guide tube.
Release screws (1).
Release screws (2) and feed out guide tube (3) towards bottom.
Installation:
Replace seal.
Tightening torque 34 41 4AZ
.
After installation:
•
Adjust handbrake
RA Removing and installing or replacing guide tube for handbrake cables
BMW AG - TIS
05.02.2013 00:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -