3 Series E93 328i (N51) CONVER
Slide open retaining clip (1) and unclip ball head.
Note:
Before removing fasteners, mark position of screws to ensure
correct alignment when installing.
Release screws (1).
Tightening torque 54 37 08AZ
.
Note:
Before removing fasteners, mark position of screws to ensure
correct alignment when installing.
Release screws (1).
Tightening torque 54 37 07AZ
.
Do not adjust barrel screws (1) for height adjustment.
When replacing roof shell, measure height of barrel screws and
carry over to new roof shell.
RA Removing and installing/replacing complete front roof shell fastener pack
BMW AG - TIS
05.02.2013 05:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
