3 Series E93 328i (N51) CONVER
Unlock plug connection (1) on left and right and disconnect.
Release screws (1).
Remove rollover protection system strut.
Release screws (1) on left and right.
Tightening torque: 54 37 13AZ
.
Release lock nut with special tool 54 0 190 .
Turn back barrel screw by approx. 3 mm.
Tightening torque: 54 37 22AZ
.
Installation:
Tighten barrel screw only with special tool 54 0 180 together
with 00 9 450 .
Release screws (1).
Tightening torque: 54 62 01AZ
.
Remove screw fastening plate.
RA Removing and installing/replacing rollover protection system
BMW AG - TIS
05.02.2013 05:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -