3 Series E93 328i (N51) CONVER
72 11 092
Removing and installing or replacing rear left
or right seat belts
Necessary preliminary tasks:
•
Remove left or right rear seat
•
Remove air outlet trim grille
•
Remove left or right side section of backrest
Release screw (2).
Tightening torque 72 11 22AZ
.
Installation:
Pin (3) determines the installation position and prevents the
anchor fitting from turning.
Release screw (1).
Tightening torque 72 11 24AZ
.
Remove reversing clip (2).
Release screw (1).
Tightening torque 72 11 21AZ
.
Remove inertia reel unit (2).
Installation:
Inertia reel is coded to prevent incorrect installation.
RA Removing and installing or replacing rear left or right seat belts
BMW AG - TIS
05.02.2013 10:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
