3 Series E93 328i (N52K) CONVER
11 36 046
Removing and installing/replacing inlet and
exhaust adjustment units (N52K)
Special tools required:
•
11 4 280
•
11 4 281
•
11 4 282
•
11 4 283
Necessary preliminary tasks:
•
Remove cylinder head cover
•
Check timing
Important!
Install special tool 11 4 280 to release the central bolts on
the inlet and exhaust adjustment units and camshafts.
Fit special tool 11 4 283 with screws (1).
Fit special tool 11 4 281 on special tool 11 4 283 .
Important!
Fit special tool 11 4 282 underneath on side of inlet
camshaft.
Release chain tensioner (2).
Tightening torque 11 31 6AZ
.
Release central bolts on inlet and exhaust adjustment units (1).
Tightening torque 11 36 1AZ
.
Installation:
Replace central bolts.
Note:
Picture in CAD and does not show special tools.
RA Removing and installing/replacing inlet and exhaust adjustment units (N52K)
BMW AG - TIS
06.02.2013 02:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -