3 Series E93 328i (N52K) CONVER
Press lines (1) in direction of cooling coil (2), pull back locking
ring towards rear. Keep locking ring pressed and detach lines (1)
from cooling coil (2).
Important!
Catch and dispose of emerging fluid.
Unlock seal (1) in direction of arrow and remove.
Release screw.
Note:
Lines of A/C system remain connected to condenser.
Press lock (1) upwards.
Carefully tilt condenser (2) in direction of engine, taking care not
to damage the condenser or lines in the process.
Press lock (1).
Unclip cooling coil (2) from holder (3) and remove.
RA Removing and installing/replacing cooling coil for power steering (N54, N52, N52
BMW AG - TIS
06.02.2013 03:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -