3 Series E93 328i (N52K) CONVER
51 61 ...
Removing and installing/replacing protecting
skid/mounting bracket
Important!
Observe safety instructions for raising the vehicle
Driving without the protective skid/mounting bracket is not
permitted!
Necessary preliminary tasks:
•
Remove front underbody protection
Release screws (1).
Tightening torque 51 71 10AZ
.
Release screw (3).
Tightening torque 51 71 11AZ
.
Release screws (2) and remove protective skid (4).
Tightening torque 51 71 12AZ
.
Installation:
Replace all screws.
Middle lug of protective skid must be situated between mounting
bracket and left diagonal strut.
RA Removing and installing/replacing protecting skid/mounting bracket
BMW AG - TIS
06.02.2013 04:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
