3 Series E93 328i (N52K) CONVER
51 11 156
Removing and installing front bumper trim
Necessary preliminary tasks:
Version with headlight washer system:
•
Remove cover for headlight washer system on left/right
Release screws (1) on bumper trim (2).
Release screws (1) on wheel arch trim (2) on left and right.
Lift out wheel arch trim (2) at side.
Installation:
Make sure wheel arch trim (2) is in correct position.
Press wheel arch cover (1) to one side.
Release left and right screws (2).
RA Removing and installing front bumper trim
BMW AG - TIS
06.02.2013 09:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -