3 Series E93 328i (N52K) CONVER
Installation:
Rivet is replaced by a stud.
Nut must be screwed on on inside of backrest.
Lug (3) of kinematic assembly must be positioned next to
stop (2).
Screw on kinematic assembly.
Tightening torque: 52 10 09AZ
.
Check kinematic assembly for ease of movement.
Installation:
Press cover (1) with positioning pin onto backrest frame.
Overview of finish-assembled (new) Bowden cable from spare
part kit.
Backrest mounting on door side:
1.
Install door-side backrest link (1).
2.
Backrest link (1) must be joined centrally on blocking
cam (2).
3.
Connect stud and tighten nut hand-tight.
RA Replacing backrest release cable for front left or right seat
BMW AG - TIS
06.02.2013 17:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
