bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing_replacing Hydraulic Unit (drive) For Retractable Hardtop|Page 2022 > < 2 RA Topping Up_extracting Fluid, Checking Fluid Level
Page 1
background image

54 37 185

Removing and installing/replacing hydraulic
unit (drive) for retractable hardtop

Necessary preliminary tasks:

Remove luggage compartment floor trim panel

Caution!

Hydraulic fluid may emerge from the disconnected lines and
the open connections on the hydraulic unit (drive).

Protect components and work area with suitable materials
(e.g. cloths).

Follow repair instructions for hydraulic system.

Do not fit hydraulic lines in kinked, crushed or transposed
condition.

Release screws (1).

Remove cover (2) for hydraulic unit.

Cut open cable tie (1).

Installation:

Replace faulty cable ties.

Detach foam part from hydraulic unit.

Remove relay (2) from holder.

RA  Removing and installing/replacing hydraulic unit (drive) for retractable hardtop

BMW AG - TIS

06.02.2013  17:30

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing_replacing Hydraulic Unit (drive) For Retractable Hardtop|Page 2022 > < 2 RA Topping Up_extracting Fluid, Checking Fluid Level