3 Series E93 328i (N52K) CONVER
On-the-job safety:
-
Comply with the relevant safety regulations
Remove remnants of adhesive from roof shell.
Clean adhesive area with Isohexane.
Air drying time:
≥
1 minute
Important!
Adhesive area must be dry and free from dust and grease.
Once it has been cleaned, do not touch the adhesive area
with bare hands.
Use 4 mm and 7 mm dia. butylene thread (see BMW Parts
Service).
Use 1.5 mm x 15 mm butylene flat tape (see BMW Parts
Service).
Overview of butylene flat tape laying on front roof shell corner,
left/right:
1.
Apply butylene flat tape from threaded bush to shortly after
metal overlap to roof shell corner.
Overview of butylene thread laying on middle roof shell, front:
1.
Apply 4 mm dia. butylene thread in sheet metal groove.
2.
Apply 7 mm dia. butylene thread in sheet metal groove.
3.
Apply 4 mm dia. butylene thread in sheet metal groove.
Installation:
Connect and smooth butylene thread joints with plastic wedge.
RA Replacing middle roof shell seal
BMW AG - TIS
06.02.2013 17:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
