3 Series E93 328i (N52K) CONVER
Drill out rivets (1) from guide element (2) on left and right.
Remove guide element (2).
Release screws (1).
Remove shaper (2) from roof shell.
Measure heights of all barrel screws with a depth gauge and note
down.
Carry over adjustment to new roof shell.
Installation:
Insert barrel screws with Loctite.
Check gap dimensions for convertible top.
RA Removing and installing/replacing roof shell at front
BMW AG - TIS
06.02.2013 17:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -