3 Series E93 328i (N52K) CONVER
•
Tape off corners of roof shell 1 and 3. Risk of damage when
positioning gauge for coupling fastener.
Note:
Close convertible top (roof module extended).
Release left and right screws (1).
Tightening torque: 54 37 13AZ
.
Slacken lock nut with special tool 54 0 190 .
Tightening torque: 54 37 24AZ
.
Turn barrel screws back with special tool 54 0 180 .
Installation:
Tighten barrel screws with special tool 54 0 180 in conjunction
with 00 9 450 .
Tightening torque: 54 37 22AZ
.
Note:
Open convertible top (roof module lowered).
Important!
Tape off corners of roof shell 1 and 3. Risk of damage when
positioning gauge for coupling fastener and assembly.
Release left and right screws (1).
Remove holder on left and right.
Release left and right screws (1).
Tightening torque: 54 37 13AZ
.
RA Gauging coupling fastener (without removing and installing roof module)
BMW AG - TIS
06.02.2013 17:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -