3 Series E93 328i (N52K) CONVER
Disconnect plug connection (1) in direction of arrow and remove
HIP module (2).
After installation:
•
Cars with out-of-date software status at time of repair:
After replacing the HIP module, program the Car
Communication Computer. Then take the car for an
initialization drive.
•
Cars with current software status at time of repair:
After replacing the HIP module, take the car for an
initialization drive.
Initialization drive:
Drive for 15-20 minutes at 50 km/h and with good GPS reception
until correct vehicle position is achieved in the navigation display.
Note:
During this time, the position pointer of the navigation system can
be motionless or move across country.
RA Replacing HIP module for Car Communication Computer
BMW AG - TIS
06.02.2013 20:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -