3 Series E93 328i (N52K) CONVER
Installation:
Feed driver (1) into slot (3) in lever (2) of coupling gear.
Align lever (2) on coupling gear so that slot (3) is correctly
positioned with respect to driver (1).
Installation:
Pin on coupling gear must reach into hole in seat.
Installation:
Make sure groove and pin are correctly positioned.
Clip flexible shaft (1) into place with coupling gear (2).
Ensure complete engagement by pulling gently on flex shaft.
Flexible shaft must not clip out here!
Unclip flexible shaft (3) from cable tie (2).
Unclip cable tie (1) from backrest.
RA Removing and installing or replacing front seat belt
BMW AG - TIS
06.02.2013 21:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
