3 Series E93 330d (M57T2) CONVER
Pull the tabs (1) on the lumbar
support (2) from the clips (3).
Pull the lumbar support (1) down.
Encase the pump hose (1) from the
pump housing (2) with corrugated
piping (3).
A = 9 cm
Tightly wrap conventional fabric
tape (1) around the entire corrugated
piping, beyond the end of the
corrugated piping (2).
A = 20 mm
The fabric tape (1) should have about
30 to 50% overlap.
(Overall length approx. 1 m)
SI Lumbar support inoperable E93
BMW AG - TIS
07.02.2013 12:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -