3 Series E93 330d (M57T2) CONVER
Unfasten nut.
Take off holder (1).
Tightening torque 24 51 1AZ .
Note:
Illustration shows E65.
Screw in special tool 24 5 361 until it is firmly connected with
shaft seal.
Screw special tool 24 5 362 onto special tool 24 5 361 and
tighten down.
This pulls the shaft seal out of the transmission housing.
Oil sealing lip on shaft seal (1).
Screw in shaft seal (1) with special tools 24 5 366 and
24 5 364 as far as it will go.
RA Replacing selector shaft seal (GA6HP26Z/6HP32Z)
BMW AG - TIS
07.02.2013 16:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -