3 Series E93 330d (M57T2) CONVER
33 32 125
Replacing a ball joint in lower steering
knuckle/wheel carrier
Special tools required:
•
33 4 465
•
33 4 466
•
33 4 474
•
33 4 475
•
33 4 481
•
33 4 482
Necessary preliminary tasks:
•
Remove coil spring at rear
•
If necessary, remove jointed rod of ride-height sensor from
camber arm bracket
•
Remove rear shock absorber from rubber mount
•
Remove camber arm from wheel carrier
•
Remove trailing arm from wheel carrier
Pull out ball joint with special tools 33 4 465 , 33 4 466 ,
33 4 475 , 33 4 474 and 33 4 482 .
Installation:
Draw in new ball joint with special tools 33 4 481 , 33 4 474 ,
33 4 475 , 33 4 466 and 33 4 465 as far as it will go.
RA Replacing a ball joint in lower steering knuckle/wheel carrier
BMW AG - TIS
07.02.2013 18:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -