3 Series E93 330d (M57T2) CONVER
41 32 010
Replacing complete cowl panel
Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 32 010).
Spot-weld bonding is used on this vehicle. Observe specific
procedure.
Remove or cover those vehicle components in the repair area
which are susceptible to heat or dust.
Use only approved spot-welding apparatus for repairs!
Place vehicle on straightening bench.
Necessary preliminary tasks:
•
Remove front side panel
Following new body parts are required (refer to Electronic Parts
Catalogue ETK):
-
(1) Support carrier, wheel arch, outer
-
(2) A-pillar, outer
Mark severance cut in accordance with specified measurement
and cut.
Important!
Cut outer metal sheet only.
Measurement a = approx. 130 mm from edge of rectangular
hole.
Open weld joint in area (1).
RA Replacing complete cowl panel
BMW AG - TIS
07.02.2013 20:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -