3 Series E93 330d (M57T2) CONVER
41 63 068
Adjusting convertible top compartment lid
Read contents of Body, General.
The E93 gap dimensions serve as the basis for adjustment work.
Necessary preliminary tasks:
Connect charger.
Note:
Carry out adjustment first vertically, then longitudinally and
laterally.
Work sequence starts with convertible top closed.
Height adjustment:
Open convertible top compartment lid (3).
Slacken nuts (2). Pay attention to spacer plates (1).
Adjust convertible top compartment lid (3) to side panels by
means of spacer plates (1).
Longitudinal and lateral adjustment:
Open convertible top until rear module (1) is opened approx.
10 cm.
Stop opening operation in the position shown.
Close rear end module (1) again.
Stop closing operation when the coupling fastener has locked the
rear end module (1).
The correct position is reached when the rear end module (1) is
flush with the side panel in area (2). If necessary, repeat
procedure.
RA Adjusting convertible top compartment lid
BMW AG - TIS
07.02.2013 20:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -