3 Series E93 330d (M57T2) CONVER
51 61 011
Removing and installing/replacing V-strut,
front axle carrier, left or right
Important!
Observe safety instructions for raising the vehicle
Driving without the V-strut is not permitted!
Necessary preliminary tasks:
•
Remove front underbody protection
Release screws (1, 2, 3).
Remove V-strut (4) towards front.
Installation:
Replace screws.
Make sure bolts are installed in correct positions.
•
Screw (1) M8x55
•
Screw (2) M8x35
•
Screw (3) M10x35
Tightening torque 51 71 10AZ
.
RA Removing and installing/replacing V-strut, front axle carrier, left or right
BMW AG - TIS
07.02.2013 23:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -