3 Series E93 330d (M57T2) CONVER
52 16 050
Removing and installing or replacing lumbar
cushion on front seat
Necessary preliminary tasks:
•
Partially remove backrest cover
Lift fleece tabs of lumbar support cushion carrier from plastic clips
(1).
Installation:
Hook lumbar support cushion over first and fourth wire.
Detach lumbar cushion (2) from spring wire.
Unclip air cushion (1) for backrest width adjustment with carrier
from backrest frame.
Installation:
Make sure the carrier for backrest width adjustment is fitted
correctly on the backrest frame.
RA Removing and installing or replacing lumbar cushion on front seat
BMW AG - TIS
07.02.2013 23:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -