3 Series E93 330d (M57T2) CONVER
Tighten down rear module bracket (1) with suitable screws to
special tool 54 0 150 .
Tightening torque: 2 Nm
Turn back all barrel screws on rear module bracket (1) and check
for ease of movement.
Gauge, bracket, rear module:
Note:
In order to gauge the rear module bracket, the roof module bracket must be gauged.
Adjustment work should be carried out by one person only.
Left gauge: 54 0 151
Right gauge: 54 0 152
Place special tool, with rear module bracket screwed, over centring pin.
Insert centring pin (2) in gauge and screw down.
Screw gauge with nut (1) to bracket for roof module.
RA Gauging rear module
BMW AG - TIS
08.02.2013 00:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
