3 Series E93 330d (M57T2) CONVER
Carefully position roof module bracket gauge on basic gauge and screw to special tool 00 9 251 .
Observe tightening sequence:
1.
Tighten down front screws on basic gauge to 2 Nm.
2.
Tighten down rear screws on basic gauge to 2 Nm.
Screw roof module bracket on basic gauge crosswise in specified
sequence (1 to 4) with torque wrench.
Tightening torque: 6 Nm
RA Gauging roof module brackets
BMW AG - TIS
08.02.2013 00:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
