3 Series E93 330d (M57T2) CONVER
54 37 005
Replacing front roof shell seal
Special tools required:
•
00 9 470
Installation:
•
Screws with sealing compound must be replaced and must
not be reused
•
Thread of nut must be cleaned beforehand
New parts required:
•
Seal
•
Butylene thread dia. 4 mm and dia. 7 mm
•
Butylene flat tape 1.5 mm x 15 mm
Measure gap dimensions in following areas with special tool
00 9 470 :
A) between roof shell and trim strip
B) between front and middle trim strips
Note down gap dimensions.
RA Replacing front roof shell seal
BMW AG - TIS
08.02.2013 00:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -