3 Series E93 330d (M57T2) CONVER
Installation:
Before fitting microswitch cover (4), carry out function test of
microswitch (3) with backrest folded back:
•
Insert microswitch plug connection.
•
Switch ignition on
•
Locking pawl (1) is at bottom, microswitch (3) is actuated,
belt warning lamp must not light up/flash.
•
Raise locking pawl (1) with release handle, microswitch (3)
is not actuated, belt warning lamp must flash.
•
If necessary, replace microswitch (3).
Important!
Do not bend switching spring (2) on microswitch (3).
RA Replacing microswitch on left or right front seat
BMW AG - TIS
08.02.2013 01:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -