3 Series E93 330d (M57T2) CONVER
position "P".
Emergency program
The emergency program is activated if the transmission management should fail or detect a malfunction that
could lead to critical driving conditions. In the emergency program, the vehicle remains operational, albeit with
limitations.
If the electronic transmission control fails (without current), the following forward gears can be engaged:
Failure in 1st-3rd gear -> emergency 3rd gear
Failure in 4th-6th gear -> emergency 5th gear
A restart will be performed in 3rd gear.
Special situations (functions in EGS)
> E60, E61 from 03/2007
> E63, E64 from 09/2007
> E70
Direction change memory function
The driver wishes to change from selector lever position "D" to selector lever position "R" or from selector lever
position "R" to selector lever position "D".
-
At v
≤
5 km/h, the driver's wish is carried out by the electronic transmission control (EGS).
-
At 5
≤
v
≤
10 km/h, selector lever position "N" is engaged by the electronic transmission control, the display of
the currently engaged gear range changes to the driver's desired selector lever position "D" or selector lever
position "R".
The driver's wish is stored. If the vehicle's speed drops below 5 km/h within 1 second, the driver's wish for
selector lever position "D" or selector lever position "R" is carried out by the electronic transmission control. If the
speed stays above this threshold, selector lever position "N" remains and the display changes to selector lever
position "N".
-
If v > 10 km/h, selector lever position "N" is engaged by the electronic transmission control
Parking lock memory function
The driver wishes to engage selector lever position "P" (parking lock)
-
At v
≤
2 km/h, selector lever position "P" is engaged by the electronic transmission control (EGS).
-
At 2
≤
v
≤
5 km/h, the current selector lever position remains, the driver's wish is stored. If the vehicle's
speed drops below 2 km/h within a second, selector lever position "P" is engaged by the electronic
transmission control
-
At v > 5 km/h, the driver's wish is not accepted. The current selector lever position remains and the Check-
Control message "Transmission position P only at standstill" is displayed
Position "N" hold time
If v
≤
2 km/h, the engine is OFF, selector lever position "N" is engaged and the ID transmitter is inserted, the
selector lever position "N" hold time starts for 30 minutes.
During this time, information is transmitted by the electronic transmission control (EGS), the function display remains
on and selector lever position "N" lights up in the gate pattern diagram. At the end of selector lever position "N" hold
time, the display flashes and the electronic transmission control (EGS) engages selector lever position "P" after
10 seconds.
If the selector lever is moved during position "N" hold time, the 30 minutes selector lever position "N" hold time start
afresh.
Operation
The different automatic transmission drive positions are selected with the selector lever.
SBT 6-speed automatic transmission E53, E60, E61, E63, E64, E65, E66, E70, E81, E83,
BMW AG - TIS
08.02.2013 12:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -