3 Series E93 330i (N53) CONVER
13 90 500
Replacing tank venting valve (N53)
Necessary preliminary tasks:
•
Check stored fault messages
•
Switch off ignition
•
Remove intake filter housing
Installation location:
The tank vent valve is located at the rear below the intake air
manifold.
Unlock plug (1) and remove.
Unlock hose (2) and detach.
Unlock hose (3) on throttle valve assembly and disconnect.
Detach tank vent valve (4) from holder and remove.
Note:
Add final details to vehicle.
Read out fault memory of DME control unit.
Now clear the fault memory.
RA Replacing tank venting valve (N53)
BMW AG - TIS
10.02.2013 13:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
