3 Series E93 330i (N53) CONVER
51 71 ...
Replacing convertible top compartment lid
seal
Open rear end module (see picture).
Release sheet screw (1) and thin sheet screw (2) on left and
right.
Installation:
Make sure screws are installed in correct positions.
Retract folding roof fully and open rear end cover.
Important!
Do not stretch, kink or crush seal.
Pull off seal (1) from left to right.
Installation:
Moisten seal with soapy water.
Carry out installation from left to right (check screw fastening
points).
RA Replacing convertible top compartment lid seal
BMW AG - TIS
10.02.2013 20:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
