3 Series E93 330i (N53) CONVER
Release catches (1) from bottom left/right.
Release catches (2) from above with screwdriver on left/right and
slide rear console (3) towards rear.
Slide rear console (1) towards rear until guides (2) are fed out.
Installation:
Ensure correct cable routing.
Raise front section of rear console (1) and feed catches (2) on
left/right out of storage compartment (3).
Remove rear console (1).
Replacement:
Remove rear console trim at rear.
RA Removing and installing/replacing rear console
BMW AG - TIS
10.02.2013 21:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
