3 Series E93 330i (N53) CONVER
Roof shell, left side:
Unlock plug connection (1) on blocking circuit and disconnect.
Unlock plug connections (2) on aerial amplifier and disconnect.
Unclip wiring harness.
Roof shell, right side:
Unlock plug connection (1) on blocking circuit and disconnect.
Note:
To avoid rear window breakage, it is absolutely essential to use
wire puller/flat awl (1).
Slide wire puller/flat awl (1) from Roll Out 2000
from inside
between roof shell and rear window through adhesive bead.
Important!
When cutting in area of electric cables (1), insert guard from
Roll Out 2000
between electric cables (1), cutting wire and
sheet metal.
Components and sheet metal will be damaged if guard is not
fitted.
Cut out rear window with Roll Out 2000
.
Lift out rear window with special tool 51 3 010 .
Note:
Replace rear window if cosmetic lip is damaged.
RA Removing and installing/replacing rear window
BMW AG - TIS
10.02.2013 22:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -