3 Series E93 330i (N53) CONVER
51 43 090
Removing and installing/replacing light strip
in side trim panel
Necessary preliminary tasks:
•
Remove side trim panel
•
If necessary, remove LED
Important!
Risk of damage
Handle light strip with care.
Do not knock fibre optic cables.
Release locking washers (1) on sound insulation (2) and
remove sound insulation (2).
Position new light strip on side trim panel (2) and mark welding
spots (1) to be opened.
Drill out welding spots (1).
Note:
Only drill down to door trim panel area so as not to damage the
contact surface.
Feed light strip out of side trim panel (2).
Remove all remnants of plastic from contact surfaces of side trim
panel (2).
Installation:
Carefully feed light strip in area (1) into side trim panel.
Push welding pins (3) through holes into side trim panel and
secure with locking washers (2).
Shorten welding pins (3) down to measurement (A).
A = 3 mm
RA Removing and installing/replacing light strip in side trim panel
BMW AG - TIS
10.02.2013 22:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
